No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 9800 V100 Configuration Guide 03

This document introduces service configuration process for OSN 9800.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Transit Nodes for Ethernet Services

Configuring Transit Nodes for Ethernet Services

On a live data network, an Ethernet service is added to its source NE, passed through on its transit NEs, and dropped from its sink NE. This section describes how to configure transit NEs for an Ethernet service.

Configuring Transit NEs for Ethernet Services Carried by Ports

This topic describes how to configure transit NEs for an Ethernet service carried by ports.

Prerequisites

  • For the Ethernet service carried by ports, set Encapsulation Type to Null (recommended) and Port Mode to Later 2.
  • You must be an NM user with NE administrator authority or higher.
  • The Ethernet service carried by ports exclusively occupies the NNI ports on its transit NEs. The DCN function is disabled for the NNI ports.

Procedure

  1. In the NE Explorer, select the required NE from the root list, and choose Configuration > Packet Configuration > Ethernet Service Management > E-Line Service from the Function Tree.
  2. Click New. Then, the New E-Line Service dialog box is displayed.

  3. Set parameters of transit NEs for an Ethernet service. For details about the parameters, see E-Line Service Parameters (Configuration on a Per-NE Basis).

    NOTE:
    • For transit NEs for an Ethernet service, set Service Type to UNI-UNI.
    • For transit NEs for an Ethernet service, you do not need to set QoS parameters.

  4. Click OK.
  5. Click Query to check the configured Ethernet service.

Configuring Transit NEs for Ethernet Services Carried by PWs

This topic describes how to configure transit NEs for an Ethernet service carried by PWs.

Background Information

For transit NEs of an Ethernet service carried by PWs, you only need to configure MPLS tunnels whose Node Type is Transit. For details on how to configure an MPLS tunnel, see Configuring an MPLS Tunnel.

If the PW which carries Ethernet services belongs to the MS-PW, the MS-PW needs to be configured at the Switching Provider Edge (S-PE) node through which Ethernet services pass. This topic describes how to configure the MS-PW.

Procedure

  1. In the NE Explorer, select the NE and choose Configuration > Packet Configuration > MPLS Management > PW Management from the Function Tree. Click the MS PW tab in the right pane.
  2. Click New. In the dialog box that is displayed, set the parameters of the MS-PW.
  3. After the parameters setting, click OK. In the window that is displayed, click Close.

Configuring the Pass-Through Node of Ethernet Services Carried by QinQ

This section describes how to configure the pass-through node of Ethernet services carried by the QinQ link or flexible QinQ.

Prerequisites

  • Encapsulation Type of services carried by QinQ has been set to Null.
  • You must be an NMS user with "NE administrator" authority or higher.
  • The DCN function of the NNI port has been disabled for the pass-through node of Ethernet services carried by QinQ.

Procedure

  1. In the NE Explorer, select an NE and choose Configuration > Packet Configuration > Ethernet Service Management > E-Line Service.
  2. Click Create. Set the basic parameters of a VPWS instance for using QinQ to carry E-Line services. Set Service Type of E-Line services to UNI-UNI. For details about the parameters, see E-Line Service Parameters (Configuration on a Per-NE Basis).

  3. Add AC ports.
    1. Click the button on the left of L2VPN AC List. In the Interface[Select] dialog box that is displayed, the available AC ports on the NE are listed.
    2. In the Interface[Select] dialog box, select two AC ports (QinQ sub-interfaces) to be added.

      NOTE:
      The created virtual interface must be selected, and the sub-interface type must be supported by the interface service carrying mode. For example, if an interface carries services in QinQ Link mode, select the QinQ Link sub-interface; if an interface carries services in Selective QinQ mode, select the mapping sub-interface; if an interface transparently transmits services, select the stacking sub-interface.

    3. Click OK.
  4. After the settings are completed, click OK.
  5. Click Query to query the configured Ethernet services.
Translation
Download
Updated: 2019-09-05

Document ID: EDOC1100033663

Views: 24816

Downloads: 782

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next