No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 9800 V100 Configuration Guide 03

This document introduces service configuration process for OSN 9800.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Service-Related Basic Parameters and Features

Configuring Service-Related Basic Parameters and Features

Before configuring a pseudo wire emulation edge-to-edge (PWE3), ensure that the service-related basic parameters and features have been configured.

Configuring UNI Port Attributes

UNI port attributes need to be configured based on the actual service types.

Prerequisites

You must be an NM user with "NE operator" authority or higher.

Background Information

C-VLAN and S-VLAN services can share the same port only on the E212,E208,E124,E302,E401,U401, U402 and U210 boards.

Context

  1. In the NE Explorer, select the NE. In the navigation tree, choose Configuration > Packet Configuration > Interface Management > Ethernet Interface.
  2. Configure UNI port attributes based on the actual service types.

    For UNI ports, set the parameters as follows:

    1. On the Basic Attributes tab, set Working Mode and Max Frame Length (bytes) based on the service plan.
    2. On the Layer 2 Attributes tab, set Encapsulation Type.

      • If services are transparently transmitted on UNI ports, set Encapsulation Type to Null.
      • If only C-VLAN services are received and transmitted on UNI ports, set Encapsulation Type to 802.1Q.
      • If only S-VLAN services are received and transmitted on UNI ports, set Encapsulation Type to QinQ.
      • If both C-VLAN services and S-VLAN services are received and transmitted on UNI ports, set Encapsulation Type to 802.1Q-QinQ.
    3. On the Layer 2 Attributes tab, perform the following operations:
      • Set Tag and Default VLAN ID.
      • Set QinQ type domain based on the received services.
        • If only S-VLAN services are received and transmitted on UNI ports, set QinQ type domain to A.When QinQ type domain is set to A, the packets whose TPIDs are 8100 or A can pass through the UNI ports.

(Optional) Configuring LAGs or MC-LAGs

If link aggregation groups (LAGs) or multi-chassis link aggregation groups (MC-LAGs) are planned on a network, it is recommended that LAGs and MC-LAGs be configured before service configuration to prevent services from being configured on standby ports on LAGs.

For details about the configuration of LAGs and MC-LAGs, see the Feature Description:

  • LAG
  • MC-LAG
Translation
Download
Updated: 2019-09-05

Document ID: EDOC1100033663

Views: 18854

Downloads: 664

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next