No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 9800 V100 Configuration Guide 03

This document introduces service configuration process for OSN 9800.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Process

Configuration Process

This topic describes the configuration process for an EoO board that receives and transmits data services.

Configuration Process Description

Figure 5-4 Configuration flowchart

Table 5-7 describes the configuration steps.

Table 5-7 Configuration process
No. Step Description
1 Set the port type.

Mandatory

  • Set the port type to Ethernet Port of an EoO board.
  • Operation description: For details about the configuration procedure, see Setting the Port Type.
2

Set the port working mode.

Mandatory

  • The port working mode must be set based on the actually used optical module.
  • Operation description: For details about the configuration procedure, see Configuring the Working Mode.
3 Set Ethernet interface attributes.

Mandatory

  • Set the Ethernet interface attributes of an EoO board.
  • Operation description: For details about the configuration procedure, see the Ethernet interface configuration process of Carry Ethernet service in Configuring an Ethernet Port.
NOTE:
On the network where a universal line board is used and data services are received on an EoO board, you do not need to configure virtual port mapping for the universal line board.
4 Configure data services for the EoO board.

Mandatory

  • Configure data services for the channels from EoO board client-side ports to virtual ports (VPs).
  • Operation description: For details about the configuration procedure, see Creating E-Line Services Carried by QinQ.
Translation
Download
Updated: 2019-09-05

Document ID: EDOC1100033663

Views: 21032

Downloads: 706

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next