No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OSN 9800 V100 Configuration Guide 03

This document introduces service configuration process for OSN 9800.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Composite Service (Method 2)

Configuring a Composite Service (Method 2)

This topic describes how to use method 2 to configure a composite service. This method helps the user better understand the composition of a composite service.

Prerequisites

Procedure

  1. Create an unterminated pseudo wire emulation edge-to-edge (PWE3) service, that is, virtual private wire service (VPWS) or E-line service.
    1. From the main menu of the U2000, choose Service > PWE3 Service > Create PWE3 Service. The Create PWE3 Service window is displayed.

    2. In the Create PWE3 Service window, set the basic attributes. For details, see E-Line Service Parameters (Configuration in End-to-End Mode).

      NOTE:
      • Composite services can be configured using a service template. The user can select a template from the Service Template drop-down list or create a template.
      • Set Service Type to ETH.

    3. Click Configure Source and Sink to configure the source and sink nodes.

    4. Select the desired NE. In the pane on the right, select the board and port for service access to configure a VLAN. Click Add Node to configure the source node.

    5. Select a sink node that is not terminated. In the navigation tree on the left, click Unterminated and set LSR ID for the sink node. Click Add Node and OK.
    6. Specify the tunnel that forward a PW as follows: Double-click the Forward Tunnel column. In the Select Tunnel window that is displayed, select the tunnel that forwards the PW and click OK.
    7. Specify the forward and reverse labels of the PWs. Reverse labels are automatically assigned by the system but forward labels need to be manually set.

    8. Click OK or Apply to complete the configuration of the PWE3 service.

    9. In the Operation Result dialog box, click Browse Trail to view the unterminated PWE3 service that is newly created.

    10. Record the PW ID that is automatically generated and forward and reverse labels because the information is required during the configuration of the unterminated PW for a virtual private LAN service (VPLS) service. On the PW tab, click PW.

      NOTE:

      In this example, PW ID is 39, Incoming Label is 32123, and Outgoing Label is 779.

  2. Create a VPLS service (that is, E-LAN service).
    1. From the main menu of the U2000, choose Service > VPLS Service > Create VPLS Service. The Create VPLS Service window is displayed.

    2. Set basic attributes and add a VPLS node as follows: In the Create VPLS Service window, set the basic attributes and click Add to select NPE. The Select NE window is displayed.

    3. In the Select NE window, select the desired NE, click , and click OK.
    4. Create an unterminated PW that carries the VPLS service as follows: Click Detail, on the PW Configuration tab, click Create to choose Unterminated PW. The Create PW window is displayed.

    5. In the Create PW window, set the basic attributes. Ensure that PW ID, Outgoing Label, and IncomingLabel are the same as those set during PWE3 service creation. In the Advanced Attribute area, specify the tunnel as follows: Double-click the blank area in the Tunnel text box. In the window that is displayed, specify the tunnel that forward the PW and click OK.
    6. Create a service access interface (SAI) that carries the VPLS service as follows: On the PW Configuration tab, click SAI List and click Create. The Create SAI window is displayed.

    7. In the Create SAI window, select the required board, port, and service VLAN. Click OK.



    8. Click OK to complete the creation of the VPLS service.

    9. Click Browse Trail to view the VPLS service.

  3. Create a composite service. That is, connect the unterminated PWE3 and VPLS services to form an end-to-end composite service.
    1. From the main menu of the U2000, choose Service > Composite Service > Create Composite Service. The Create Composite Service window is displayed.

    2. Set Service Name and set Creation Type to Customize.

    3. Click Select and choose VPLS and PWE3. In the Set Filter Criteria window that is displayed, click Filter to search for the unterminated PWE3 and VPLS services that have been created, and click Select to add them to Service Component.

    4. Click Create to choose PW. The Create PW Connection Point window is displayed.

    5. Select a PW and click to add it to Selected PW Information List.
    6. Click OK to create PW connection points.
    7. Click OK or Apply on the lower lower right of the window to create the composite service.

    8. Click Browse Service to view the composite service.
Translation
Download
Updated: 2019-09-05

Document ID: EDOC1100033663

Views: 19422

Downloads: 682

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next