No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OSN 9800 V100 Configuration Guide 03

This document introduces service configuration process for OSN 9800.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Other Ethernet Features

(Optional) Configuring Other Ethernet Features

This topic describes how to configure other Ethernet features that are not mentioned in the preceding topics. Such Ethernet features are configured mainly in single-station mode.

This topic does not describe the single-station mode. For details, see the following topics:

  • Configuring MPLS-TP PW OAM: MPLS-TP PW OAM must be configured in the scenario where MS-PW is used.
  • Ethernet Port OAM: Ethernet port OAM must be configured in the scenario where Ethernet physical ports are directly connected to each other.
  • QoS: In a high bandwidth-consuming network, quality of service (QoS) can properly allocate limited bandwidth resources by service type.
Updated: 2019-09-05

Document ID: EDOC1100033663

Views: 20625

Downloads: 703

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next