No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disconnecting an L2TP Tunnel Manually

Disconnecting an L2TP Tunnel Manually

Context

When there are no access users, a network fault occurs, or the administrator needs to disconnect an L2TP tunnel, you can manually disconnect the L2TP tunnel and the sessions in the tunnel. After the L2TP tunnel is disconnected manually, all the L2TP users who use the tunnel or sessions will go offline.

Before you disconnect an L2TP tunnel, run the display l2tp tunnel command to view the tunnel ID or the tunnel name of the remote end that you want to disconnect. Run the display l2tp session command to view its local session ID.

After you forcibly disconnect an L2TP tunnel, all control and session connections in the tunnel are removed. The tunnel can be re-established when a new user dials in.

Procedure

  • Run the reset l2tp tunnel { peer-name remote-name | local-id tunnel-id } command in the user view to forcibly disconnect an L2TP tunnel based on the local tunnel ID or the remote tunnel name.
  • Run the reset l2tp session session-id session-id command in the user view to forcibly disconnect a session connection based on the local session ID.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142015

Downloads: 357

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next