No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DSVPN Deployment on a Large-sized Network

DSVPN Deployment on a Large-sized Network

A large-sized network has a large number of branch offices. The deployment of Non-Shortcut Scenario of DSVPN requires the Spokes to have a large routing table and high forwarding performance. Shortcut Scenario of DSVPN can be deployed without upgrading the Spokes. This deployment reduces the routing entries on the Spokes, lowering the requirements on the Spokes' routing table size and forwarding performance.

Figure 4-12  DSVPN deployment on a large-sized network

As shown in Figure 4-12, all the Spokes only have routes to the Hub. When two Spokes need to communicate with each other, the first packet is sent to the Hub. After that, a tunnel is established between the Spokes, and the Spokes can directly exchange data traffic.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 153622

Downloads: 372

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next