No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EVPN Applications

EVPN Applications

Service Overview

Figure 9-4 shows the basic networking in which EVPN functions as the VXLAN control plane. A VXLAN tunnel is established using EVPN. Specifically, an EVPN peer relationship is established between two VTEPs. The VTEPs exchange EVPN routes carrying the VNIs and IP addresses of the VTEPs to establish a VXLAN tunnel.

Figure 9-4  EVPN networking application

Networking Description

Device1, Device2, and Device3 each have a VPN instance created. An EVPN peer relationship is configured between every two peers to exchange EVPN routes so that a corresponding VXLAN tunnel is established between every two peers. As a result, Host1, Host2, and Host3 communicate with each other through the VXLAN tunnels.

Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 151515

Downloads: 367

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next