No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Some Service Packets Are Lost After A2A VPN Is Deployed?

Why Some Service Packets Are Lost After A2A VPN Is Deployed?

After A2A VPN is deployed, A2A VPN packets are discarded if their size exceeds the interface MTU but the DF flag is not set to 0. To solve the problem, run the ipsec df-bit clear command to enable fragmentation of A2A VPN packets.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 152192

Downloads: 367

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next