No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2TP Dialup Is Successful After Dozens of Attempts and Error 691 Is Displayed. Why?

L2TP Dialup Is Successful After Dozens of Attempts and Error 691 Is Displayed. Why?

After L2TP is configured on the device, users can dial up successfully after several attempts and error 691 is displayed during the attempts. The cause is that the device supports only 16-byte challenge messages. When challenge messages are not of 16 bytes, CHAP authentication fails and error 691 indicating user name or password error is displayed. Configure L2TP re-negotiation so that the LNS and client can negotiate the 16-byte challenge messages.

Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 154239

Downloads: 372

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next