No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DSVPN Deployment on a Small- or Medium-sized Network

DSVPN Deployment on a Small- or Medium-sized Network

Small- and medium-sized networks have only a few branches, and the branches can dynamically establish VPNs by deploying Non-Shortcut Scenario of DSVPN.

Figure 4-11  DSVPN deployment on a small- or medium-sized network

As shown in Figure 4-11, Spoke1 and Spoke2 connect to the Hub through the public network. DSVPN is deployed to enable Spoke1 and Spoke2 to learn routes from each other. Spoke1 and Spoke2 can communicate with each other directly because they are each other's next hop.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142446

Downloads: 359

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next