Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for L2TP
This section describes the application scenarios for L2TP.
- Client-Initiated L2TP Connection
- LAC-Initiated L2TP Connection upon Receiving a Call Connection
Request
- LAC-Initiated L2TP Connection upon Receiving a Call from a
PPPoE User
- L2TP Client-Initiated L2TP Connection
- LAC-Initiated L2TP Connection When Users from Multiple Domains
Are Connected
- Authenticating VPDN Users Using the RADIUS Server
- Allocating the Frame-IP and Frame-Route Attributes and the
Specified Address Pool Name to L2TP Users by the RADIUS Server
- Setting Up a Secure Tunnel Connection Using L2TP over IPSec
Encapsulation
- Setting Up a Secure Tunnel Connection Using IPSec over L2TP
Encapsulation
Previous
