No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for BGP/MPLS IP VPN

Default Settings for BGP/MPLS IP VPN

This section describes the default settings for BGP/MPLS IP VPN.

Table 7-3 lists the default settings for BGP/MPLS IP VPN.

Table 7-3  Default settings for BGP/MPLS IP VPN

Parameter

Default Setting

BGP/MPLS IP VPN feature

Disabled

Alarm function for BGP/MPLS IP VPN events

Disabled

Number of local AS number repetitions allowed (applicable to Hub and Spoke networking)

0

Label allocation mode on PE devices

Label per route

Label allocation mode on ASBRs (inter-AS VPN)

Label per route

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142774

Downloads: 359

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next