No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Establishing an IPSec Tunnel Using an Efficient VPN Policy

Establishing an IPSec Tunnel Using an Efficient VPN Policy


Figure 5-35  Using an Efficient VPN policy to establish an IPSec tunnel

Pre-configuration Tasks

Before using an Efficient VPN policy to establish an IPSec tunnel, complete the following tasks:
  • Configure a reachable route between source and destination interfaces.
  • Determine the initiator as the remote device and the responder as the Efficient VPN server.
  • Determine data flows to be protected by IPSec.
  • Determine parameters in an IPSec proposal.

Configuration Procedure

Configure an Efficient VPN policy on a remote device, and configure an IPSec policy template on the Efficient VPN server to establish an IPSec tunnel.

Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 144850

Downloads: 361

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next