No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LAC-Initiated L2TP Connection upon Receiving a Call Connection Request

LAC-Initiated L2TP Connection upon Receiving a Call Connection Request

An enterprise has a branch located in another city, and the branch network is a traditional dial-up network. Branch users need to establish VPDN connections with users in the headquarters. Therefore, the branch users apply for the L2TP service from the ISP. The ISP configures the NAS as the LAC to send call connection requests to the LNS through the Internet. The gateway in the headquarters is configured as the LNS to establish VPDN connections between the branch and the headquarters.

Figure 1-8  LAC-initiated L2TP connection upon receiving a call connection request

Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 150758

Downloads: 365

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next