No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing A2A VPN Statistics

Clearing A2A VPN Statistics

Context

Statistics cannot be restored after being cleared. Exercise caution when you run the reset command.

Procedure

  • To clear statistics about IPSec packets, run the reset ipsec statistics command in the user view.
  • To clear statistics about IKE packets, run the reset ike statistics command in the user view.
  • To clear the TEK SA and KEK SA in a created GDOI policy, run the reset ipsec gdoi-sa [ policy policy-name [ seq-number ] ] command in the user view.
  • To clear the SA established by the current IKE, run the reset ike sa { remote ip-address | conn-id conn-id } command in the user view.

    The reset ike sa command does not clear the GDOI SA.

  • To clear the TEK SA and KEK SA related to a GDOI group of the KS, run the reset gdoi ks group group-name command in the user view.
  • To clear statistics about members in a GDOI group of the KS, run the reset gdoi ks members group group-name command in the user view.
  • To clear historical information about members in a GDOI group of the KS, run the reset gdoi ks members history record [ group group-name ] command in the user view.
  • To clear the statistics about rekey messages on the KS, run the reset gdoi ks rekey statistics [ group group-name ] command in the user view.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 153866

Downloads: 372

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next