No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VXLAN (in BGP EVPN Mode)

Configuring VXLAN (in BGP EVPN Mode)

Pre-configuration Tasks

Before configuring user communication over VXLAN tunnels, ensure Layer 3 route reachability.

Configuration Process

Figure 13-17 shows the process of configuring communication between end users in different VXLAN network segments.

Figure 13-17  Configuring communication between end users in different VXLAN network segments
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 165821

Downloads: 396

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next