No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for VPLS

Licensing Requirements and Limitations for VPLS

Involved Network Elements

None

License Requirements

For VPLS-capable devices, their licensing requirements for the VPLS function are as follows:

  • AR1200&AR2200&AR3200&AR3600 series: By default, VPLS function is disabled on a new device. To use the VPLS function, apply for and purchase the following license from the Huawei local office.
    • AR1200 series: AR1200 value-added service package for data services

    • AR2200 series: AR2200 value-added service package for data services

    • AR3200 series: AR3200 value-added service package for data services

    • AR3600 series: AR3600 value-added service package for data services

Feature Limitations

  • The device supports IPv4 VPLS only.

  • The device supports only the unqualified mode in which the device learns MAC addresses.

  • BPDUs including LACP, LLDP, and OAM packets cannot be transparently transmitted on a VPLS network by default. The device can transparently transmit BPDUs only after transparent transmission of BPDUs is enabled. For details, see (Optional) Configuring Transparent Transmission of BPDUs.

    If both transparent transmission of BPDUs and EFM are enabled, the device terminates OAM packets locally.

  • The device can select LSP tunnels to transmit the VPLS service.

The AR100&AR120&AR150&AR160&AR200 series routers do not support VPLS.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 145286

Downloads: 361

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next