No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing MAC Address Entries

Clearing MAC Address Entries

Context

After MAC address entries are cleared, the entries cannot be restored. Confirm the action before you clear the entries.

Procedure

  • Run the undo mac-address static mac-address interface-type interface-number vsi vsi-name command to clear MAC address entries for a VSI.
  • Run the undo mac-address [ dynamic | all ] command to clear dynamic, or all MAC address entries.
  • Run the undo mac-address static command to clear static MAC address entries.
  • Run the undo mac-address blackhole [ vsi vsi-name ] command to clear blackhole MAC address entries.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142800

Downloads: 359

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next