No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the A2A VPN Status

Monitoring the A2A VPN Status

Context

All A2A VPN configurations are complete.

Procedure

  • Run the display ipsec gdoi-sa [ policy-name [ seq-number ] ] command to check information about the GDOI SA.
  • Run the display ipsec statistics command to check the statistics about IPSec packets.
  • Run the display ike statistics { v1 | v2 } command to check the statistics about IKE packets.
  • Run the display gdoi ks members history record [ group group-name ] command to display historical information about members in the GDOI group of the KS.
  • Run the display gdoi ks rekey statistics [ group group-name ] command to display statistics about rekey messages on the KS.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142541

Downloads: 359

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next