No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for L2TP

Default Settings for L2TP

This section provides the default settings for L2TP.

Table 1-1  Default settings for L2TP
Parameter Default Setting

l2tp enable

Disabled

tunnel authentication

Enabled

tunnel password

Not configured

tunnel name

Device name

tunnel avp-hidden

Disabled

mandatory-chap

Disabled

mandatory-lcp

Disabled

tunnel timer hello

60s

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 150958

Downloads: 367

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next