No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an MCE Device

Configuring an MCE Device

An MCE device can connect to multiple VPNs. The MCE solution isolates services of different VPNs while reducing cost of network devices.

Pre-configuration Tasks

Before configuring an MCE device, complete the following task:

  • Configuring the link layer protocol and network layer protocol for LAN interfaces and connecting the LAN to the MCE device (reserve one interface for each service)

Configuration Procedure

The first three tasks are mandatory.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 150777

Downloads: 365

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next