No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Connectivity of the VPLS Network

Checking Connectivity of the VPLS Network

Context

To check connectivity of a VPLS network, configure a VPLS network and run the following functions on PE devices.

Procedure

  • Checking VPLS network connectivity

    • Run the ping vpls mac mac-address vsi vsi-name [ vlan vlan-id | -c count | -m time-value | -s packsize | -t timeout | -exp exp | -r replymode | -h ttl ] * command to check connectivity of the Layer 2 forwarding link on the VPLS network.

    • Run the ping vpls [ -c echo-number | -m time-value | -s data-bytes | -t timeout-value | -r reply-mode | -exp exp-value | -v ] * vsi vsi-name peer peer-address [ negotiate-vc-id vc-id ] command to check connectivity of the link between PEs on the Martini VPLS network.

    • Run the trace vpls mac mac-address vsi vsi-name [ vlan vlan-id ] [-t timeout | -f first-ttl | -m max-ttl | -exp exp | -r replymode ] * command to check PEs and P devices along the PW on the VPLS network. This command is also used to check the connectivity of Layer 2 forwarding links and locate faults on the network.

    • Run the tracert vpls [ -exp exp-value | -f first-ttl | -m max-ttl | -r reply-mode | -t timeout-value ] * vsi vsi-name peer peer-address [ negotiate-vc-id vc-id ] [ full-lsp-path ] command to check connectivity of the Martini VPLS network.

  • Checking ping/trace packet statistics

    • Run the display vpls-ping statistics command to check the number of sent and received VPLS MAC ping packets.

    • Run the display vpls-trace statistics command to check the number of sent and received VPLS MAC trace packets.

  • Clearing ping/trace packet statistics

    • Run the reset vpls-ping statistics command to clear VPLS MAC ping statistics.

    • Run the reset vpls-trace statistics command to clear VPLS MAC trace statistics.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142347

Downloads: 357

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next