No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Transmitting Data of Multi-Protocol Local Networks Through a GRE Tunnel

Transmitting Data of Multi-Protocol Local Networks Through a GRE Tunnel

As shown in Figure 3-5, Term1 and Term2 are the local networks running IPv6. Term3 and Term4 are local networks running the IP protocol. These subnets, located in different areas, need to communicate through the public IP network.

Figure 3-5  Transmitting data of multi-protocol local networks through a GRE tunnel

Router_1 and Router_2 set up a GRE tunnel through which Term1 can communicate with Term2 without affecting communication between Term3 and Term4.

Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 153869

Downloads: 372

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next