No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for PWE3

Default Settings for PWE3

Table 11-2 lists the default settings for PWE3.

Table 11-2  Default settings for PWE3
Parameter Default Setting
MPLS L2VPN Disabled
MTU 1500
VCCV Enabled
Control word Disabled
Jitter buffer depth 8 ms
Number of TDM frames encapsulated in CESoPSN or SAToP packets 8
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 144865

Downloads: 361

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next