No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Point-to-Point Layer 2 Connection Between Sites in Different Cities

Point-to-Point Layer 2 Connection Between Sites in Different Cities

VLL technology enables Layer 2 protocol data units (L2PDUs) to traverse a carrier network without being changed. Sites in different cities can use this technology to set up P2P Layer 2 interconnection and communicate as if they were on a LAN.

Figure 10-15  P2P Layer 2 interconnection between sites in different cities
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 154322

Downloads: 372

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next