No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring EVPN BGP Soft Reset

Configuring EVPN BGP Soft Reset


EVPN BGP soft reset allows a device to receive EVPN routes from EVPN BGP peers again.

EVPN BGP soft reset performs a soft reset on EVPN BGP connections, which triggers EVPN BGP peers to send EVPN routes to a local device without tearing down the EVPN BGP connections and allows the local device to apply a new filtering policy and refresh the EVPN BGP routing table.


  • Run the refresh bgp evpn { all | peer-address | group group-name } { export | import } command in the user view to configure EVPN BGP soft reset.
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 153558

Downloads: 372

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next