No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for IPSec

Default Settings for IPSec

Table 5-6  Default settings for IPSec


Default Setting

Local host name used in IKE negotiation

Local device name

Interval for sending NAT keepalive packets


IKE proposal

An IKE proposal with the lowest priority. For details, see Configuring an IKE Proposal.

IPSec proposal

No IPSec proposal is configured. For detailed parameters in an IPSec proposal, see Configuring an IPSec Proposal.

SA trigger mode


IKE SA hard lifetime


Global IPSec SA hard lifetime

  • Time-based: 3600s
  • Traffic-based: 1843200 Kbytes (1800 Mbytes)

ACL check for decrypted packets


Global IPSec anti-replay


Global IPSec anti-replay window size


Packet fragmentation mode

Fragmentation after encryption

NAT traversal


Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142346

Downloads: 357

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next