Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for GRE
This section provides GRE configuration examples, including networking requirements, configuration roadmap, and configuration procedure.
- Example for Configuring a Static Route for GRE to Implement
Interworking Between IPv4 Networks
- Example for Configuring OSPF for GRE to Implement Interworking
Between IPv4 Networks
- Example for Configuring a GRE Tunnel to Implement Interworking
Between IPv6 Networks
- Example for Enlarging the Operation Scope of a Network with
a Hop Limit
- Example for Configuring BGP/MPLS IP VPN to Use a GRE Tunnel
- Example for Configuring VLL to Use a GRE Tunnel
- Example for Connecting a CE to a VPN Through a GRE Tunnel over
a Public Network
- Example for Connecting a CE to a VPN Through a GRE Tunnel over
a VPN
- Example for Configuring GRE to Implement Communication Between
FR Networks
- Example for Configuring an Ethernet over GRE Tunnel
- Example for Configuring an Ethernet over mGRE Tunnel
Previous
