No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Collecting Traffic Statistics on a VPLS PW

Collecting Traffic Statistics on a VPLS PW


To analyze the network traffic model, collect traffic statistics on the specified PW.

Perform the following steps on the device configured with the VSI:


  1. Run the system-view command to enter the system view.
  2. Run the vsi vsi-name [ static ] command to enter the VSI view.
  3. Run the pwsignal ldp command to configure LDP as the PW signaling protocol and enter the VSI-LDP view.
  4. Choose either of the following methods to enable traffic statistics collection based on the number of PWs.

    • When there are many PWs:

      Run the traffic-statistics enable command to enable statistics collection on public network traffic of all PWs in Martini VPLS mode.

    • When there are a few PWs:

      Run the traffic-statistics peer peer-address [ negotiation-vc-id vc-id ] enable command to enable statistics collection on public network traffic of a specified PW in Martini VPLS mode.

Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 153258

Downloads: 369

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next