No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting Related Parameters for a VSI

(Optional) Setting Related Parameters for a VSI

This section describes how to set related parameters for a VSI.

Pre-configuration Task

Before setting VSI-related parameters, complete the following tasks:

Configuration Procedure

After creating a VSI and assigning a signaling protocol to it, you can adjust common parameters of the VSI. According to different applicable environments, you can determine whether to modify MAC address learning modes and MAC address entries.

Perform the following operations on the PE.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142564

Downloads: 359

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next