No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the L2TP Configuration

Verifying the L2TP Configuration

After configurations of other L2TP functions are complete, run the following commands on the LAC or the LNS to view the configurations, tunnel status, and session status.

Prerequisites

L2TP sessions have been established successfully between the LAC and LNS.

Procedure

  • Run the display l2tp tunnel command to view information about L2TP tunnel IDs, session IDs, and public network addresses of the local end and the remote end.
  • Run the display l2tp session command to view information about L2TP session IDs of the local end and the remote end and the local tunnel ID.
  • Run the display l2tp-group [ group-number ] command to view configurations of the specified L2TP group.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 151069

Downloads: 367

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next