No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - VPN

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document describes VPN features on the device and provides configuration procedures and configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Efficient VPN Configuration

Verifying the Efficient VPN Configuration


The Efficient VPN configurations are complete.


  • Run the display ipsec proposal [ brief | name proposal-name ] or display ipsec proposal [ brief | name proposal-name ] ctrl-plane command to check IPSec proposal information.
  • Run the display ipsec efficient-vpn [ brief | capability | name efficient-vpn-name | remote ] command to check Efficient VPN policy information.
  • Run the display ipsec sa [ brief | duration | efficient-vpn efficient-vpn-name | policy policy-name [ seq-number ] | profile profile-name | remote ip-address ] command to check IPSec SA information.
  • Run the display ipsec interface brief command to check information about the IPSec policies applied to interfaces.
  • Check IKE information. See Verifying the IKE Configuration.
Updated: 2019-08-07

Document ID: EDOC1100033725

Views: 142169

Downloads: 357

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next