No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the WIDS Configuration

Verifying the WIDS Configuration

Context

After the WIDS configuration is complete, you can check WIDS profiles on the device, including their configuration and profile reference information, attacking device list, and dynamic blacklist.

Procedure

  • Check the configuration and reference information about the WIDS profile.

    • Run the display wids-profile { all | name profile-name } command to check information about the WIDS profile.

    • Run the display references wids-profile name profile-name command to check reference information about the WIDS profile.

  • Check the WIDS attack detection results and devices added to the dynamic blacklist.

    • Run the display wlan ids attack-detected { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address } command to check information about the detected attacking devices.

    • Run the display wlan ids attack-history { all | flood | spoof | wapi-psk | weak-iv | wep-share-key | wpa-psk | wpa2-psk | mac-address mac-address } command to check historical records of the detected attacking devices.

    • Run the display wlan ids attack-detected statistics command to check statistics on the detected attacks.

    • Run the display wlan ids dynamic-blacklist { all | ap-id ap-id | ap-name ap-name | mac-address mac-address } command to check attacking devices added to the dynamic blacklist.

    • Run the display station dynamic-blacklist { ap-id ap-id | ap-name ap-name } command to check the dynamic blacklist.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 33702

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next