No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Application Scenarios for Roaming

Application Scenarios for Roaming

Intra-AC Roaming

A small enterprise needs to provide access services for users through a WLAN and requires nonstop service transmission when the users move within the enterprise. To meet the requirements, deploy one AC and multiple APs inside the enterprise and configure the AC to manage the APs and provide WLAN services for users.

In Figure 6-5, the enterprise deploys one AC to manage multiple APs. The STA can connect to the WLAN through AP_1 and AP_2. When the STA roams from AP_1 to AP_2, services are not interrupted.
Figure 6-5  Intra-AC roaming
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 36103

Downloads: 220

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next