No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining STA Statistics

Maintaining STA Statistics

Checking STA Running Statistics

Context

After STAs successfully associate with an AP, you can run the following commands in any view to monitor the STA running status.

Procedure

  • Run the display station { ap-group ap-group-name | ap-name ap-name | ap-id ap-id | ssid ssid | sta-mac sta-mac-address | vlan vlan-id | all } command to check STA access information.
  • Run the display station statistics [ sta-mac sta-mac-address | ap-name ap-name | ap-id ap-id ] command to check STA statistics.
  • Run the display ap sta-signal strength { ap-name ap-name | ap-id ap-id } [ radio radio-id ] command to check the average signal strength of STAs on an AP.

Checking STA Online Failure and Offline Records

Context

You can check STA online failure and offline records to locate online failure and offline reasons. This helps the maintenance personnel rectify the fault, enabling STAs to connect to the wireless network properly.

Procedure

  • Run the display station online-fail-record { all | ap-name ap-name | ap-id ap-id | sta-mac sta-mac-address } command to check records about STA online failures.
  • Run the display station offline-record { all | ap-name ap-name | ap-id ap-id | sta-mac sta-mac-address } command to check STA offline records.

Clearing STA Online Failure and Offline Records

Context

Before re-collecting STA online failure and offline records, clear STA online failure records and offline records. This helps the maintenance personnel manage and maintain STAs.
NOTE:

The cleared records cannot be restored. Therefore, exercise caution when performing these operations.

Procedure

  • Run the reset station online-fail-record { all | ap-name ap-name | ap-id ap-id | sta-mac sta-mac-address } command to clear STA online failure records.
  • Run the reset station offline-record { all | ap-name ap-name | ap-id ap-id | sta-mac sta-mac-address } command to clear STA offline records.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 36463

Downloads: 220

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next