No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Maintaining AP Statistics

Maintaining AP Statistics

Checking AP Running Statistics

Context

After AP online and management AP configurations are complete, run the following commands in any view to check AP running statistics.

Procedure

  • Run the display ap run-info { ap-name ap-name | ap-id ap-id } command to check AP running information.
  • Run the display ap performance statistics { ap-name ap-name | ap-id ap-id } command to check AP performance statistics.
  • Run the display radio { all | ap-group ap-group-name | ap-name ap-name | ap-id ap-id } command to check AP radio information.
  • Run the display ap asyn-message err-info { all | ap-name ap-name | ap-id ap-id } command to check records about AP restart failures.
  • Run the display ap uncontrol all command to check unauthorized APs.
  • Run the display channel switch-record { all | ap-name ap-name radio radio-id | ap-id ap-id radio radio-id | reason reason } command to check channel switching records.
  • Run the display ap traffic statistics wireless { ap-name ap-name | ap-id ap-id } radio radio-id [ ssid ssid ] command to check packet statistics on an AP radio.
  • Run the display ap elabel { ap-name ap-name | ap-id ap-id } command to check AP electronic label information.
  • Run the display ap service-config acl { ap-name ap-name | ap-id ap-id } command to check ACL configurations on an AP.
  • Run the display ap port { all | ap-name ap-name | ap-id ap-id | ap-mac ap-mac } command to check the AP port status and traffic information.

Checking AP Neighbor Information

Context

You can view neighbor information on a specified AP radio to determine the AP location and neighbor relationship, helping locate rogue APs and plan the WLAN.

Procedure

  1. Run the display ap lldp neighbor { { ap-name ap-name | ap-id ap-id } [ interface interface-type interface-number ] | brief } command to check LLDP neighbor information on an AP.
  2. Run the display ap neighbor { ap-name ap-name | ap-id ap-id } [ radio radio ] command to check information about neighbors of a radio.
  3. Run the display ap around-ssid-list { ap-name ap-name | ap-id ap-id } command to check SSIDs of an AP's neighbors.

Checking AP Online Failure and Offline Records

Context

You can check the AP online failure and offline records to locate the reason for AP online failures and offline reasons. This helps the maintenance personnel manage and maintain the APs.

Procedure

  • Run the display ap online-fail-record { all | mac mac-address } command to check AP online failure records.
  • Run the display ap offline-record { all | mac mac-address } command to check AP offline records.

Clearing AP Online Failure and Offline Records

Context

Before re-collecting AP online failure and offline records, you can clear AP online failure records and offline records. This helps the maintenance personnel manage and maintain APs.
NOTE:

The cleared records cannot be restored. Therefore, exercise caution when performing these operations.

Procedure

  • Run the reset ap online-fail-record { all | mac mac-address } command to clear AP online failure records.
  • Run the reset ap offline-record { all | mac mac-address } command to clear AP offline records.

Clearing the List of Unauthorized APs

Context

You can clear the list of unauthorized APs to clear the removed or unauthenticated APs that disconnect with an AC. This operation helps re-collect and confirm unauthenticated APs.

NOTE:

The cleared records cannot be restored. Therefore, exercise caution when performing these operations.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan ac

    The WLAN view is displayed.

  3. Run reset ap unauthorized record

    Clear the list of unauthorized APs.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 33641

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next