No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Cannot an AP Go Online When the AR Functions as an AC?

Why Cannot an AP Go Online When the AR Functions as an AC?

  • The AP is not in the list of APs that are supported by the AR.
  • The AC function is used with a license and is unavailable by default.
  • No PVID is configured for the network access device directly connected to the AP.
  • SN or MAC address authentication is enabled on the AC, but the AP is not on the AP whitelist.
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 34052

Downloads: 211

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next