No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Are Packets Lost When the STA Pings the Gateway?

Why Are Packets Lost When the STA Pings the Gateway?

Run the dtim-interval 1 and beacon-interval 100 commands to configure the DTIM interval and Beacon interval specified in the radio profile.

NOTE:

DTIM refers to delivery traffic indication map.

An AP broadcasts Beacon frames at intervals to notify STAs of an existing 802.11 network.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 36643

Downloads: 220

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next