No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Whether APs Can Go Online

Checking Whether APs Can Go Online

Context

Before deploying APs onsite, complete network planning operations, for example, configure the AC and involved NEs, and add APs on the AC. After APs are connected to the network and powered on, they can automatically upgrade and go online. Users do not need to perform other configurations on the APs onsite.

You can check whether the APs go online properly on the AC as planned. If the AP status displays as normal, the APs have gone online properly.

Procedure

  • Run the display ap all command to check whether APs go online on an AC.
Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 38311

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next