No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing AP Wired Login

Managing AP Wired Login

Context

You can log in to an AP through the console port, STelnet, SFTP, or Telnet in wired mode. When an AP does not need to be logged in, the login modes are disabled to ensure AP security, preventing unauthorized users from using these modes to log in. To log in to the AP, enable one or more login modes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan ac

    The WLAN view is displayed.

  3. Run ap username username password cipher

    The user name and password for AP login are configured.

    By default, the user name is admin and password is admin@huawei.com.

  4. Run ap-system-profile name profile-name

    An AP system profile is created, and the AP system profile view is displayed.

    By default, the system provides the AP system profile default.

  5. Run undo stelnet server disable

    The STelnet service function is enabled.

    By default, the STelnet server function is enabled on an AP.

  6. (Optional) Run undo console disable

    AP login through the console port is enabled.

    By default, a user can log in to the AP through a console interface.

  7. (Optional) Run undo sftp server disable

    The SFTP service function is enabled.

    By default, the SFTP server function is enabled on an AP.

  8. (Optional) Run telnet enable

    The Telnet service function is enabled.

    By default, Telnet is disabled on an AP.

  9. Run quit

    Return to the WLAN view.

  10. Bind an AP system profile to an AP group or AP.

    • Binding an AP system profile to an AP group.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP group.

        By default, the AP system profile default is bound to an AP group.

    • Binding an AP system profile to an AP.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the ap-system-profile profile-name command to bind the AP system profile to the AP.

        By default, no AP system profile is bound to an AP.

  11. Run quit

    Return to the WLAN view.

  12. Run commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Checking the Configuration

  • Run the display ap username [ ap-name ap-name | ap-id ap-id ] command to check the user name for AP login.
  • Run the display ap-system-profile { all | name profile-name } command to check configuration and reference information about an AP system profile.
  • Run the display references ap-system-profile name profile-name command to check reference information about an AP system profile.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 33855

Downloads: 209

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next