No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Interference Detection

Configuring Interference Detection

Context

After the interference detection function is configured, an AP sends an alarm to an AC when one of the following interference values exceeds the alarm threshold:
  • Co-channel interference: WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.5 hwAPCoInterfDetectedTrap
  • Adjacent-channel interference: WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.7 hwNerborInterfDetectedTrap
  • STA interference: WLAN_1.3.6.1.4.1.2011.6.139.16.1.1.1.9 hwStaInterfDetectedTrap

Pre-configuration Tasks

Before configuring interference detection, perform the task of Configuring Basic WLAN Services.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan ac

    The WLAN view is displayed.

  3. Run radio-2g-profile name profile-name or radio-5g-profile name profile-name

    The 2G or 5G radio profile view is displayed.

  4. Run interference detect-enable

    The interference detection function is enabled.

    By default, the interference detection function is disabled.

  5. (Optional) Configure interference detection thresholds.

    • Run the interference co-channel threshold threshold-value command to configure the alarm threshold for co-channel interference.

      By default, the alarm threshold for co-channel interference is 50%.

    • Run the interference adjacent-channel threshold threshold-value command to configure the alarm threshold for adjacent-channel interference.

      By default, the alarm threshold for adjacent-channel interference is 50%.

    • Run the interference station threshold threshold-value command to configure the alarm threshold for STA interference.

      By default, the alarm threshold for STA interference is 32.

  6. Run quit

    Return to the WLAN view.

  7. Bind the radio profile to an AP group or a specific AP. For the detailed procedure, see Binding a Radio Profile.
  8. Run quit

    Return to the WLAN view.

  9. Run commit { all | ap-name ap-name | ap-id { ap-id1 [ to ap-id2 ] } &<1-10> }

    Configurations are delivered to APs.

Verifying the Configuration

  • Run the display radio-2g-profile name profile-name command to check the interference detection configuration in a 2G radio profile.
  • Run the display radio-5g-profile name profile-name command to check the interference detection configuration in a 5G radio profile.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 34079

Downloads: 211

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next