No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a WLAN Security Policy

Configuring a WLAN Security Policy

Pre-configuration Tasks

You can configure WLAN security policies to authenticate identities of wireless terminals and encrypt user packets, protecting the security of the WLAN and users. The supported WLAN security policies include open system authentication, WEP, WPA/WPA2-PSK, WPA/WPA2-802.1X, WAPI-PSK, and WAPI-certificate. You can configure one of them in a security profile. Open system authentication and WPA/WPA2-802.1X need to be configured together with NAC to manage user access.

Before configuring security policy, perform the task of Basic WLAN Service Configuration.


WLAN security policies are configured using profiles. Figure 7-16 shows the configuration flowchart.

Figure 7-16  WLAN security policy configuration flowchart

The configuration procedure is as follows:

Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 38252

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next