No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Layer 2 Roaming

Layer 2 Roaming

Layer 2 Roaming

Figure 6-3  Layer 2 roaming
Before roaming After roaming
  1. The STA sends a service packet to the AP_1.
  2. After receiving the service packet, the AP_1 sends it to the AC.
  3. The AC forwards the service packet to the upper-layer network.
  1. The STA sends a service packet to the AP_2.
  2. After receiving the service packet, the AP_2 sends it to the AC.
  3. The AC forwards the service packet to the upper-layer network.
Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 33690

Downloads: 207

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next