No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Country Code & Channel Compliance Table, and Channel and Power Restrictions

Country Code & Channel Compliance Table, and Channel and Power Restrictions

Different countries or regions have specified the channels and maximum transmit power of radio signals that can be used locally. Radio signals working on different channels may have varying signal strength. The Country Code & Channel Compliance Table describes the country code and channel compliance, the maximum power allowed by each channel, and the mapping relationship between channels and frequencies. You can directly search for this table on the Huawei enterprise service technical support website ( N/A indicates that the country or region does not support the channel.

When planning or optimizing WLANs, pay attention to working channels and corresponding transmit power of WLAN devices. Channel switching may affect signal strength, degrading network quality.

If any channel in the list does not comply with the local legal rules, contact technical support personnel.

The maximum channel power specified by China is the maximum power of radio interface. The actual signal transmit power is affected by factors such as antenna gain, and may exceed 27 dBm. The maximum channel power specified by the other country codes refers to the actual transmit power of radio signals.

Radar Channel

Channels 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 can be used as radar channels. If the channels supported by some countries or regions overlap with the radar signals, avoid using the radar channels.

Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 38514

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next