No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a STA Whitelist Profile

Configuring a STA Whitelist Profile

Context

A STA whitelist profile contains MAC addresses of wireless terminals allowed to connect to the WLAN. To allow only some STAs to connect to the WLAN, configure a STA whitelist profile and apply the STA whitelist profile to an AP system profile.

The effective scope of the STA whitelist profile differs according to the profiles to which it is applied. AP system profile: The STA whitelist profile takes effect based on the AP. APs using the AP system profile will use the STA whitelist. The STA whitelist profile takes effect on all STAs connected to the APs (all VAPs).

NOTE:
If a STA whitelist profile is empty, any STA can connect to the WLAN to access network resources.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan ac

    The WLAN view is displayed.

  3. Run sta-whitelist-profile name profile-name

    A STA whitelist profile is created and the STA whitelist profile view is displayed.

    By default, no STA whitelist profile is created.

  4. Run sta-mac mac-address

    The MAC address of a STA is added.

    By default, the MAC address of a STA is not added to the whitelist.

Translation
Download
Updated: 2019-05-20

Document ID: EDOC1100033726

Views: 33973

Downloads: 211

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next