No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring a WDS Whitelist

(Optional) Configuring a WDS Whitelist

Context

A WDS whitelist profile contains MAC addresses of neighboring APs allowed to set up WDS links with an AP. After a WDS whitelist profile is applied to an AP radio, only APs with MAC addresses in the whitelist can access the AP, and other APs are denied. In the WDS, only APs with radios working in root mode and middle mode can have a whitelist configured. APs in leaf mode require no whitelist.

NOTE:
  • WDS links can be set up only when neighboring APs with MAC addresses in the whitelist succeed in authentication.
  • If the AP uses no whitelist, all the neighboring APs can connect to the bridge.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run wlan ac

    The WLAN view is displayed.

  3. Run wds-whitelist-profile name whitelist-name

    A WDS whitelist profile is created, and the WDS whitelist profile view is displayed.

    By default, no WDS whitelist profile is available in the system.

  4. Run peer-ap mac mac-address

    MAC addresses of neighboring APs that are allowed to connect to an AP are added to the WDS whitelist profile.

    By default, no MAC address of a neighboring AP is added to a WDS whitelist profile.

  5. Run quit

    Return to the WLAN view.

  6. Enter the radio view.

    • Enter the AP group radio view.
      1. Run the ap-group name group-name command to enter the AP group view.
      2. Run the radio radio-id command to enter the radio view.
    • Enter the AP radio view.
      1. Run the ap-id ap-id, ap-mac ap-mac, or ap-name ap-name command to enter the AP view.
      2. Run the radio radio-id command to enter the radio view.

  7. Run wds-whitelist-profile whitelist-name

    The WDS whitelist profile is bound to the AP radio.

    By default, no WDS whitelist profile is bound to an AP radio.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 36369

Downloads: 220

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next