No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Network Architecture of WLAN Roaming

Network Architecture of WLAN Roaming

Figure 6-2 shows the network architecture of WLAN roaming. AC manage APs on the WLAN. AP_1 and AP_2 associate with AC. A STA roams on the WLAN. During roaming, the STA associates with different APs. The roaming process is as follows: The STA moves from the coverage area of AP_1 to AP_2. Since AP_1 and AP_2 both connect to AC, the STA implements Intra-AC Roaming.

Figure 6-2  WLAN roaming
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 36720

Downloads: 220

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next