No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CLI-based Configuration Guide - WLAN-AC

AR100, AR120, AR150, AR160, AR200, AR1200, AR2200, AR3200, and AR3600 V200R010

This document provides the concepts, configuration procedures, and configuration examples of WLAN-AC features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why Does a STA Fail to Discover the SSID of an AP When the AP Software Version Is Correct and Has Correct WLAN Configuration?

Why Does a STA Fail to Discover the SSID of an AP When the AP Software Version Is Correct and Has Correct WLAN Configuration?

Possible causes are:

  • The SSID hiding function is enabled using the ssid-hide command in the service set view. In this case, run the undo ssid-hide command in the service set view to disable the SSID hiding function.

  • To check whether the AP works properly, run the display ap-run-info command on the device functioning as the AC.

Translation
Download
Updated: 2019-08-07

Document ID: EDOC1100033726

Views: 36713

Downloads: 220

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next