No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Interoperation Configuration Guide

AR Router

This document provides cases for connecting AR enterprise routers to devices of other vendors.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Plan

Data Plan

Before the configuration, plan data according to Table 19-1. The data in Table 19-1 is used for reference only.

Table 19-1  Data plan for interconnection between the router and FW

Public Network Address of Router

1.1.1.1

Private Network Address of Router

10.1.1.2

Public Network Address of FW

2.1.1.1

Private Network Address of FW

10.1.2.1

Parameters for IPSec Phase 1 (IKE Negotiation Phase)

IKE version: V1

Negotiation mode: main

Authentication method: pre-shared key

Pre-shared key: huawei@123

Encryption algorithm: aes-cbc-256

Authentication algorithm: sha2-512

DH group: group 14

Lifetime: 28800s

DPD detection: enabled

Parameters for IPSec Phase 2 (IPSec Negotiation Phase)

Security protocol: ESP

Encapsulation mode: tunnel

Encryption algorithm: aes-256

Authentication algorithm: sha2-512

Lifetime: 3600s

PFS function: disabled

Translation
Download
Updated: 2019-05-17

Document ID: EDOC1100034005

Views: 21083

Downloads: 445

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next